POLYSYSTEM 600(50)

Recommendations for processing:

The key conditions for the qualitative filling of a form with polyurethane foam are: compliance with the accuracy of dosage and temperature conditions of the PU-system components' processing regime; sufficient mass of the poured PU-system portion; proper preparation and required temperature of the mold.

POLYSYSTEM 600(50) PU-system is processed by filling open or closed metal molds of various sizes and configurations by means of high- or low-pressure machines. Before the actual filling, the molds are cleaned and lubricated with anti-adhesive lubricant (based on waxes, oils, silicones, etc.), which ensures easy and quick removal of finished products.
Optimal temperature of the mold working surface is (28 - 55) °C.
Before processing, the components are thermostated up to (20 ± 2) °C.
The product curing time is 10 - 20 minutes (depending on its size and configuration).

Once the curing time is over, the product is removed from the mold and kept for 24 hours in a room with a temperature not lower than 18 °C - to ensure the final curing of polyurethane foam. Technical documentation for the equipment and the process of obtaining finished products are the guidelines for the PU-system processing.


Documentation

TTNPU-004-2019 technical requirements. POLYSYSTEM 600(50) polyurethane system.

Handling and storage

POLYSYSTEM 600(50) Component A warranty period of storage is 6 months - when stored in a dry place in a hermetically sealed manufacturer's container at a temperature of (10 – 25) °C.
Component B warranty period and storage conditions - in accordance with the technical data provided by the manufacturer.

The POLYSYSTEM 600(50) PU-system technical requirements and Component B safety passport are the guidelines for the transportation, storage, handling and safety of these materials. These documents are updated periodically. Ask manufacturers and/or suppliers for updated versions of relevant documents before using the PU-system. When working with the above-mentioned materials, it is necessary to pay attention to personnel health, to compliance with safety and health regulations, as well as to environment safety.

The information contained in this document is based on our current level of technical knowledge and experience. All information and technical support are provided (orally, in writing or in any other form) without any legal warranty or assurance and are subject to change without notice. Due to the large number of factors that may affect the processing and use of our materials, it is hereby understood that the processing facilities that use our materials, technical information or technical support assume a direct obligation to release us from any liability arising thereof. It is expressly agreed that processing facilities must mandatorily conduct their own testing and assessment of our materials' suitability for specific applications, including an assessment of the applicability of our materials in terms of their compliance with applicable laws, rules and regulations relating to industrial safety, occupational health and environmental protection. Any statement or recommendation that is not contained in this document is not authorized and does not put us under any kind of obligation. No provision of this document should be construed as recommending the use of any product or information in violation of any patent for the material or its use. Appropriately protected rights, including the rights of third parties, as well as existing laws and regulations must be observed by the purchaser of our products at their own responsibility.